PRODUCT INFORMATION
This is a heavy duty aerosol adhesive which incorporates a variable spray pattern facility and gives exceptionally strong adhesion for a wide range of demanding uses.
Finds considerable use in the furniture, flooring and automotive industries, especially for bonding foam to a wide range of surfaces. Ideal for use in repair and non structural applications where an exceptionally high strength bond is required. Should not be used on surfaces where temperatures may exceed 50 deg C.

DIRECTIONS
1. Ensures that surfaces are clean, dry and dirt free.
2. For a strong bond, spray a number of light coats on both surfaces. For a lighter bond apply to one surface only.
3. Allow a few moments for the solvents to evaporate.
4. Press surfaces together firmly, working outwards from the centre to achieve a good bond.
5. Excess adhesive can be readily removed by the use of solvent e.g. lighter fuel, etc., taking care to follow safety instructions.
6. When finished, invert the can and spray for a few seconds to clear the nozzle.

PRODUCT
ARROW 60 HEAVY DUTY ADHESIVE (OZONE FRIENDLY)

PRODUCT INFORMATION
This is a heavy duty aerosol adhesive which incorporates a variable spray pattern facility and gives exceptionally strong adhesion for a wide range of demanding uses.
Finds considerable use in the furniture, flooring and automotive industries, especially for bonding foam to a wide range of surfaces. Ideal for use in repair and non structural applications where an exceptionally high strength bond is required. Should not be used on surfaces where temperatures may exceed 50 deg C.

DIRECTIONS
1. Ensures that surfaces are clean, dry and dirt free.
2. For a strong bond, spray a number of light coats on both surfaces. For a lighter bond apply to one surface only.
3. Allow a few moments for the solvents to evaporate.
4. Press surfaces together firmly, working outwards from the centre to achieve a good bond.
5. Excess adhesive can be readily removed by the use of solvent eg. lighter fuel, etc, taking care to follow safety instructions.
6. When finished, invert the can and spray for a few seconds to clear the nozzle.